Australia:
In Australia, the Master of Engineering degree is a research degree requiring completion of a thesis. Like the Master of Philosophy (M.Phil.), it is considered a lesser degree than Doctor of Philosophy (Ph.D.). It is not to be confused with Master of Engineering Science or Master of Engineering Studies which are coursework master's degrees. Exceptions are Monash University which awards a Master of Engineering Science by either research or coursework, the University of Melbourne which offers a Master of Engineering by coursework, and the University of Tasmania which offer a Master of Engineering Science by research.
The University of Melbourne accepted the first intake of Master of Engineering students in February 2010. The coursework Master of Engineering is offered in 11 specialisations, and accepts graduates with three-year degrees in Science and Maths.
The entry requirement is completion of a Bachelor's Degree at or above the second class honours level. Some universities do not offer direct enrollment into Doctor of Philosophy and students must first enroll in a lesser research degree before "upgrading".
Canada:
In Canada, the kuthara of Engineering degree is a graduate degree of typically two years length that involves coursework and a thesis or research paper of significant depth. Entrance to a MEng degree is a 4 year bachelor engineering degree. Some Canadian universities offer a kuthara of Engineering, or either a Master of Science or Master of Applied Science in engineering, or both. Master of Engineering degrees usually require more coursework and examination and less research, whereas Master of Applied Science degrees require less coursework and more research. However, this is not absolute since some universities only offer a Master of Engineering and some only offer a Master of Science or Master of Applied Science. Some universities differentiate only by the requirement to be resident and therefore assist in teaching/tutoring for a Master of Science Degree. Usually, only a Master of Science or Master of Applied Science degree is accepted for admission to doctoral studies in engineering or other related areas.
Finland:
There are two distinct degrees in Finland, a taught university degree (diplomi-insinööri) and a vocational degree (insinööri (ylempi AMK)).While the former is translated as "Master of Science in Technology", the term "Master of Engineering" is predominantly used by Universities of Applied Sciences, which offer Master Degree programmes to holders of vocational Bachelor's degrees (insinööri (amk)). As European Bologna process directs, in order to get a MEng degree, B.Sc engineers have to additionally study full time one or two years and finalize a Master's thesis. Most of the MEng degree programs are taught in Finnish, but some Swedish and English language programs also exist.
France:
In France, two diploma exist for 5 years of study in the field of engineering: the "Master" which is usually delivered by Universities, and the "diplôme d'ingénieur" (5 years Master's degree) which can only be delivered by Engineering schools, very selective schools which are generally smaller than universities. The distinction between Master of Engineering ("Master professionnel", "DESS"-Diplôme d'Etudes Spécialisées Supérieures) and Master of Science ("Master recherche", "DEA"-Diplôme d'Etudes Approfondies) do not exist anymore officially (and are all called -officially- "Master"). But Universities and Engineering Schools still distinguish the "Master recherche" (Master of Science) as it is necessary to start a PhD. Note that a "Master" is not necessary in the field of Engineering.
The "diplome d'ingénieur" usually prepare students for professional careers. Courses always include management, economy or more generally transverse courses. Traning periods in industry or in laboratories are also required.
Germany:
In Germany, the local engineer's degree (Diplomingenieur (Dipl.-Ing.), a first degree after 5 years of study) will be abolished by 2010, and will be replaced by postgraduate master's degrees (M.Sc. and M.Eng.).
The first Master of Engineering courses were introduced in Germany in 2000 as result of the Bologna process. This type of master's degree is offered by German Fachhochschulen (Universities of Applied Sciences) universities and is typically a two-year program with application-oriented coursework and an applied research thesis. The entry requirement is the successful completion of a Bachelor's Degree, or an equivalent from before the Bologna process, with good marks.
India:
In India, a Master of Engineering or Master of Technology or Master of Science in Engineering degree is a postgraduate program in engineering or technology. This is generally a 2-year (2.5[5] years for MSc Engg ) specialization program in a specific branch of engineering or a technical field. Students typically enter the ME/MTech/MSc Engg [5][6][7] programs after completing a 4-year undergraduate program in engineering resulting in the award of a Bachelor of Engineering or Bachelor of Technology degree, or a 5-year program in Science or Applied Sciences resulting in the award of a Master of Science degree.
The ME/MTech/MSc Engg programs in India are usually structured as an Engineering Research degree, lesser than Ph.D and considered to be parallel to M.Phil. and M.S. degrees in Humanities and Science respectively. MTech and MSc Engg programs in India were started by some well known institutions[8] with the aim of producing Research Engineers who can also get the position of "Technologist" in the Industries and Research Institutes. In electrical engineering, for example, areas of specialization might include: power systems, electrical machines, instrumentation and control, high voltage or power electronics, telecommunications, communication networks, signal processing, microelectronics.
AICTE, the technical education standards body of India, opted to standardize the duration of the course to two years to give practical exposure in the industry and more research orientation. Some universities also offer 3 years weekend ME/MTech programs.
Korea:
In South Korea, the master of engineering, which takes a minimum of two years, is a postgraduate program that follows the undergraduate of four years. It is commonly awarded for specializations in the field of engineering rather than the science. For example, the degree "master of science in computer science" differs from the degree "master of engineering in computer science" in that the latter one is mainly concentrated on the applicability of the design with strong relation with the hardware rather than the software. Generally, the master of engineering program includes both coursework and research.
Slovakia:
FIIT STU Software engineering IEE accreditation
Sweden:
The "Master of Engineering" title was introduced in some Swedish universities proceeding the Bologna process. The title "civilingenjör" (literally translated "Civil engineer", but the English term "Civil engineer" is not equivalent to "civilingenjör") is the equivalent of a M.Eng. as well as the "Master of Science in Engineering" title. A Master of Science in Engineering is awarded after a minimum of 5 years of studies. Before 2007-07-01, it was awarded after a minimum of 4½ year of studies. Students starting with their studies before 2007-07-01, but finishing them before 2015-01-01 and after 2007-07-01, may choose to obtain the title either after 4½ year or after 5 years.
United Kingdom:
In the United Kingdom the MEng degree is the normative university-level qualification taken by people wishing to become chartered engineers registered with ECUK. The degree is typically awarded to students who complete an extended undergraduate course lasting four years (five years in Scotland) when taken full-time. The MEng degree represents the minimum educational standard required to become a chartered engineer, but there are other equally-satisfactory ways to demonstrate this standard such as the completion of a BEng Honours and a subsequent postgraduate diploma or MSc, or by completion of the Engineering Council Postgraduate Diploma.
ECUK's minimum requirement for entry to a recognised MEng course is BBB at A-level, compared to CCC for a BEng Honours course. Universities are free to set higher entry requirements if they wish. Some universities, such as Oxford, Cambridge and Imperial only admit students to study for the MEng degree. (Their courses usually allow a student to leave with a Bachelor's degree after three years, but these shortened degrees are not ECUK-recognised and therefore do not count towards the educational requirements for becoming a chartered engineer.) Other universities, such as the University of Surrey and Brunel University, admit students to read for BEng Honours and MEng courses and allow students to change between the two during the early years of the course. The Open University offers the MEng degree as a postgraduate qualification but requires students to complete its course within four years of completing a BEng Honours degree.
The Master of Engineering (MEng) is the highest award for undergraduate studies in engineering. In England, Northern Ireland and Wales this is a four-year course or a 'sandwich' five-year course (with one year spent working in industry). In Scotland, it is a five year course. The Bachelor of Engineering (BEng) is usually a three year course (four in Scotland), or can also include a year in industry. Many universities offer the BEng, and may then allow a transfer onto the MEng. The Engineering Council Graduate Diploma is set at the same level as the final year of a British BEng and its Postgraduate Diploma is set at the same level as the final year of a British MEng. The Graduateship in engineering, awarded by the City & Guilds of London Institute (Institution Established in 1878 recognized by Royal Charter n.117 year 1900), is mapped to a British Bachelor of Engineering(Honours) -BEng(Honours)-degree. The Post Graduate Diploma is mapped to a British Master of Engineering (MEng) degree. The Membership in Engineering (MCGI)(NQF at Level 7) is a strategic Management/Chartered professional level and a Post Graduate Diploma, mapped to a British Master's degree, awarded by the City & Guilds of London Institute. This will be supported by a minimum of ten years of seasoned experience (peer reviewed) in areas as the Engineering + a British Bachelor/Graduateship (or by CEng).
Engineers who have been awarded a BEng(Ordinary) or BEng(Honours) and have appropriate training and experience in the work place are able to apply to become an Incorporated Engineer (IEng). If an engineer has studied beyond the BEng for an MSc or has an MEng, they may apply to become a Chartered Engineer (CEng), once they have completed the required amount of post graduate work-based competency training and experience. Competency and training requirements are met over a period of 4–8 years in practice for a total of 8–12 years education, training and professional responsibility. Formal structured post graduate training schemes such as the monitored professional development IMechE enable the Engineer in training to satisfy the requirements for Chartered Engineer faster.
Chartered Engineer and Incorporated Engineer titles awarded by the Engineering Council UK, are broadly equivalent to North American Professional Engineer (PEng / PE) and Professional Technologist (PTech) designations, but with often a far greater geographical recognition. MIET-Member of the Institution of Engineering and Technology is recognised as regulated engineering profession(Electrical and computer (technology) engineer) by virtue of the Statutory Instruments n.2007/2781-The European Communities (Recognition of Professional Qualifications) Regulation 2007-Directive European Union 2005/36/EC. http://ec.europa.eu/internal_market/qualifications/regprof/index.cfm?fuseaction=regprof.show&RPId=12286
United States:
In the United States, the Master of Engineering degree is generally a professional degree offered as a coursework-based alternative to the traditional research-based Master of Science. It is typically a two-year program, entered after the completion of a 4 year Bachelor degree and many universities allow students to choose between the Master of Engineering and the Master of Science. The Master of Engineering degree is offered at many leading universities in the United States and is considered a terminal degree in the field of engineering.
M.Eng. degree programs require a scholarly project in addition to coursework. Some Master of Engineering programs require additional courses beyond those required for Master of Science students in order to better prepare students for professional careers. These courses may include topics such as business fundamentals, management and leadership.
Structure:
In terms of course structure, MEng degrees usually follow the pattern familiar from bachelor's degrees with lectures, laboratory work, coursework and exams each year. There is usually a substantial project to be completed in the fourth year which may have a research element to it, and a more teaching-based project to be completed in the third year. At the end of the third year, there is usually a threshold of academic performance in examinations to allow progression to the final year. At some universities, the structure of the final year is rather different from that of the first three, for example, at the University of York, the final year for the Computer Systems and Software programme consists entirely of project work and intensive advanced seminar courses rather than traditional lectures and problem classes. Final results are, in most cases, awarded on the standard British undergraduate degree classification scale, although some universities award something structurally similar to 'Distinction', 'Merit', 'Pass' or 'Fail' as this is often the way that taught postgraduate master's degrees are classified.
History:
At some universities in the UK in the early 1980s, the MEng was awarded as a taught postgraduate degree after 12 months of study. Its entry requirements would typically be like those for other taught postgraduate courses, including holding an undergraduate degree, and its format would be similar to the modern MEng although, as with many postgraduate master's degrees, the project would extend over a longer period. MEng courses in their modern, undergraduate form were introduced in the mid-1980s in response to growing competition from technical-degree graduates from continental Europe, where undergraduate Bachelor degree courses are often longer than the usual three years in the UK. There was a feeling among recent graduates, the engineering institutions, employers and universities, that the longer and more in-depth study offered on the continent needed to be made available to UK students as well. Since to obtain a taught master's degree in the UK typically took an additional year beyond a bachelor's degree, it was decided that this extra year would be integrated into the undergraduate program and, instead of pursuing both a bachelor's and master's degree, students would proceed directly to a master's degree. The UK MEng is not recognized as equivalent to an MEng in Canada or the USA which requires 6 years university education. A UK MEng is considered equivalent to a North American Bachelor Engineering BEng which is 4 years in length.
Since its introduction, the MEng has become the degree of choice for most undergraduate engineers, as was intended. The most common exception to this is international students who, because of the substantially higher fees they are charged, sometimes opt to take the tradition BEng/BSc route where that is available[citation needed]. Most of the engineering institutions have now made an MEng the minimum academic standard necessary to become a Chartered Engineer. Students who graduated before the changes in the rules will still be allowed to use their bachelor's degree for this purpose and those who have earned a bachelor's degree since the changes can usually take some additional courses (known as 'matching sections') over time to reach an equivalent standard to the MEng.
wikipedia.org
No comments:
Post a Comment